Operation Manual

Chapter 15 DHCP Server
NBG6515 User’s Guide
115
15.4 Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
NBG sends to the DHCP clients.
To change your NBG’s static DHCP settings, click Network > DHCP Server > Advanced. The
following screen displays.
Figure 87 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the NBG.
Reset Click Reset to begin configuring this screen afresh.
Table 56 Network > DHCP Server > General (continued)
LABEL DESCRIPTION
Table 57 Network > DHCP Server > Advanced
LABEL DESCRIPTION
Add Application Rule
IP Address Type the LAN IP address based on the MAC address in dotted decimal notation.
MAC Address Type the MAC address (with colons) you want to assign to your NBG
LAN Static DHCP Table
# This is the index number of the static IP table entry (row).
IP Address Type the LAN IP address of a computer on your LAN.
MAC Address Type the MAC address (with colons) of a computer on your LAN.
Modify Click the Edit icon to open the edit screen where you can modify an IP address.
Click the Delete icon to remove an IP address.
DNS Server