Operation Manual

Chapter 18 Static Route
NBG6515 User’s Guide
126
Figure 95 Network > Static Route
The following table describes the labels in this screen.
Table 62 Network > Static Route
LABEL DESCRIPTION
Static Routing Settings
Route Name Enter a the name that describes or identifies this route.
Destination IP
Address
Enter the IP network address of the final destination.
IP Subnet Mask This is the subnet to which the route’s final destination belongs.
Gateway IP
Address
Enter the the IP address of the gateway.
Metric Assign a number to identify the route.
Interface Select the NBG port types. The port types are WAN and LAN.
Add Rule Click this to add the IP static route.
Application Rules Summary
# This is the number of an individual static route.
Active The rules are always on and this is indicated by the icon.
Route Name This is the name that describes or identifies this route.
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This is the IP address of the gateway. The gateway is a router or switch on the
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.
Metric This is the number assigned to the route.
Interface This displays the NBG port types. The port types are WAN and LAN.
Delete Click the Delete icon to remove a static route from the NBG. A window displays
asking you to confirm that you want to delete the route.
Reset Click Reset to begin configuring this screen afresh.