Operation Manual

Chapter 4 Monitor
NBG6515 User’s Guide
34
The following table describes the labels in this screen.
4.6 WLAN 2.4G Station Status
Click the WLAN 2.4G Station Status (Details...) hyperlink in the Status screen. View the
wireless stations that are currently associated to the NBG in the Association List. Association
means that a wireless client (for example, your network or computer with a wireless network card)
has connected successfully to the AP (or wireless router) using the same SSID, channel and
security settings.
Figure 23 Summary: Wireless Association List
The following table describes the labels in this screen.
Table 15 Summary: Packet Statistics
LABEL DESCRIPTION
Port This is the NBG’s port type.
Status For the LAN ports, this displays the port speed and duplex setting or Down when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping
a call) if you're using PPPoE or PPTP encapsulation. This field displays Down when the line is
disconnected.
For WLAN 2.4G/5G, it displays the maximum transmission rate when the WLAN 2.4G/5G is
enabled and Down when the WLAN 2.4G/5G is disabled.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx kb/s This displays the transmission speed in bytes per second on this port.
Rx kb/s This displays the reception speed in bytes per second on this port.
System Up
Time
This is the total time the NBG has been on.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.
Refresh Now Click Refresh Now to renew the screen.
Table 16 Summary: Wireless Association List
LABEL DESCRIPTION
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.