Operation Manual

Chapter 7 Router Mode
NBG6515 User’s Guide
53
7.3.1 Navigation Panel
Use the sub-menus on the navigation panel to configure NBG features.
Item This column shows the type of data the NBG is recording.
Data This column shows the actual data recorded by the NBG.
System Up Time This is the total time the NBG has been on.
Current Date/Time This field displays your NBG’s present date and time.
System Resource
- CPU Usage This displays what percentage of the NBG’s processing ability is currently used. When this
percentage is close to 100%, the NBG is running at full load, and the throughput is not going
to improve anymore. If you want some applications to have more throughput, you should
turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the NBG is using.
System Setting
- Firewall This shows whether the firewall is enabled or not.
- Bandwidth
Management
This shows whether the bandwidth management is enabled or not.
- UPnP This shows whether UPnP is enabled or not.
- Configuration Mode This shows the web configurator mode you are viewing - Expert.
IPv6 Status
Item This column shows the type of data the IPv6 is using.
Data This column shows the actual data used through the IPv6.
Interface Status
Interface This displays the NBG port types. The port types are: WAN, LAN and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping
a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
Summary
DHCP Table Click Details... to go to the Monitor > DHCP Table screen (Section 4.4 on page 32). Use
this screen to view current DHCP client information.
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 4.5 on page 33).
Use this screen to view port status and packet specific statistics.
WLAN Station Status Click Details... to go to the
Monitor > WLAN 2.4G / 5G Station Status screen (Section
4.7 on page 35). Use this screen to view the wireless stations that are currently associated
to the NBG.
Table 26 Status Screen: Router Mode (continued)
LABEL DESCRIPTION