Operation Manual

Chapter 8 Access Point Mode
NBG6515 User’s Guide
59
Figure 43 Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 28 Status Screen: Access Point Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 5.1.2 on page 36) to which the NBG is set - Access Point
Mode.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role - Server, Client or None.
WLAN 2.4G Information
- MAC Address This shows the wireless adapter MAC Address of your device.
- SSID This shows a descriptive name used to identify the NBG in the wireless 2.4G LAN.
- Channel This shows the channel number which you select manually.