Operation Manual

Chapter 9 Universal Repeater Mode
NBG6515 User’s Guide
65
Figure 47 Status: Universal Repeater Mode
The following table describes the labels shown in the Status screen.
Table 30 Status Screen: Universal Repeater Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 5.1.2 on page 36) to which the NBG is set - Universal
Repeater Mode.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN 2.4G Information
- MAC Address This shows the wireless adapter MAC Address of your device.