Operation Manual

Chapter 9 Universal Repeater Mode
NBG6515 User’s Guide
67
9.5.1 Navigation Panel
Use the menu in the navigation panel to configure NBG features in Universal Repeater Mode.
Figure 48 Menu: Universal Repeater Mode
Refer to Table 27 on page 54 for descriptions of the labels shown in the navigation panel.
9.6 AP Select Screen
9.6.1 Wireless LAN 2.4G
Use this screen to choose an access point that you want the NBG to connect to. You should know
the security settings of the target AP.
To open this screen, click Network > Wireless LAN 2.4G > AP Select tab.
Status For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
Table 30 Status Screen: Universal Repeater Mode (continued)
LABEL DESCRIPTION