Operation Manual

Chapter 9 Universal Repeater Mode
NBG6515 User’s Guide
69
After you selected one of APs and click the Next button, the screen will display as below.
Figure 50 Network > Wireless LAN 2.4G > AP Select: Connecting Success
The following table describes the labels in this screen.
Figure 51 Network > Wireless LAN 2.4G > AP Select: Root AP SSID
The following table describes the labels in this screen.
9.6.2 Wireless LAN 5G
Use this screen to choose an access point that you want the NBG to connect to. You should know
the security settings of the target AP.
To open this screen, click Network > Wireless LAN 5G > AP Select tab.
Table 32 Network > Wireless LAN 2.4G > AP Select: Connecting Success
LABEL DESCRIPTION
Back Click this to return to the previous screen.
Next Click this to continue.
Table 33 Network > Wireless LAN 2.4G > AP Select: Root AP SSID
LABEL DESCRIPTION
Root AP SSID This field displays the specific AP’s SSID which you used through the NBG.
Extender’s SSID This field displays the SSID of the NBG as an extender.
Security This field displays the specific AP’s security mode which you used through the NBG.
Back Click this to return to the previous screen.
Apply Click Apply to save your changes to the NBG.