Operation Manual

Chapter 10 Tutorials
NBG6515 User’s Guide
74
Figure 56 Example WPS Process: PBC Method
10.3.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG’s configuration interface
and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number to the PIN field in the Network > Wireless LAN 2.4G or Wireless LAN
5G > WPS Device screen on the NBG.
3 Click Start button (or button next to the PIN field) on both the wireless client utility screen and the
NBG’s WPS Device screen within two minutes.
The NBG authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the NBG securely.
The following figure shows you the example to set up wireless network and security on NBG and
wireless client (ex. NWD210N in this example) by using PIN method.
Wireless Client
Router
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES