Operation Manual

Chapter 11 Wireless LAN
NBG6515 User’s Guide
86
The following table describes the labels in this screen.
Refer to Table 38 on page 84 for descriptions of the other labels in this screen.
11.5.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your NBG allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
In order to configure and enable WEP encryption, click Network > Wireless LAN 2.4G or
Wireless LAN 5G to display the General screen. Select Static WEP from the Security Mode list.
Table 39 Network > Wireless LAN 2.4G/5G > General: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the NBG.
Reset Click Reset to begin configuring this screen afresh.