Operation Manual

Chapter 11 Wireless LAN
NBG6515 User’s Guide
91
11.8 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN 2.4G or Wireless LAN 5G > QoS. The following screen appears.
Figure 71 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
11.9 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS
tab.
Guard Interval Select Auto to increase data throughput. However, this may make data transfer more prone
to errors.
Select Long to prioritize data integrity. This may be because your wireless network is busy
and congested or the NBG is located in an environment prone to radio interference.
Apply Click Apply to save your changes back to the NBG.
Reset Click Reset to begin configuring this screen afresh.
Table 43 Network > Wireless LAN 2.4G/5G > Advanced (continued)
LABEL DESCRIPTION
Table 44 Network > Wireless LAN 2.4G/5G > QoS
LABEL DESCRIPTION
Enable WMM
QoS
Check this to have the NBG automatically give a service a priority level according to the ToS
value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service)
gives high priority to voice and video, which makes them run more smoothly.
Apply Click Apply to save your changes to the NBG.
Reset Click Reset to begin configuring this screen afresh.