User's Manual

Chapter 3 eaZy 123 Wizard
ARMOR Z1 User’s Guide
22
Figure 9 WAN Selection Type: Static
The following table describes the labels in this screen.
Note: If you get an error screen, make sure your Internet connection is working and
select the right WAN Selection Type. Contact your ISP if you are not sure of your
Internet Connection type.
3.4 Wireless Network
Configure the wireless network settings on your ARMOR Z1 in the second part. The default wireless
security setting is WPA2-PSK.
Table 6 WAN Selection Type: Static
LABEL DESCRIPTION
WAN Selection Select the Static option when the WAN port is using a fixed IP address.
IP Address Enter the IP address provided by your ISP.
Subnet Mask Enter the IP subnet mask in this field.
Gateway IP Address
(Optional)
Enter the gateway IP address in this field.