User's Manual

Chapter 5 Easy Mode
ARMOR Z1 User’s Guide
32
Figure 21 Easy Mode: Guest Wi-Fi
The following table describes the labels in this screen.
5.6.3 Notification
Use this screen to view the e-mail notification rules configured on the ARMOR Z1. See Section
13.2.2 on page 112 for how to configure e-mail notification rules and e-mail settings.
Figure 22 Easy Mode: Notification
Table 12 Easy Mode: Guest Wi-Fi
LABEL DESCRIPTION
Wireless Radio Choose whether you want to apply the wireless settings to the 2.4G Hz or 5G Hz
wireless radio.
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the guest wireless network.
Security Mode Select WPA2-PSK to enable data encryption. Or select No Security to allow wireless
clients to communicate with the ARMOR Z1 without any data encryption.
Password This field appears when you choose WPA2-PSK as the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify Password Type the password again to confirm.
Cancel Click Cancel to reload the previous configuration for this screen.
Apply Click Apply to save your changes back to the ARMOR Z1.