User's Manual

Chapter 7 Access Point Mode
ARMOR Z1 User’s Guide
43
4 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “192.168.1.2” as the web address in your web browser.
Note: After clicking Login, the Easy Mode appears. Refer to Section on page 27 for the
Easy Mode screens. Change to Expert Mode to see the screens described in the
sections following this.
7.3.3 Configuring your WLAN and Maintenance Settings
The configuration of wireless and maintenance settings in Access Point Mode is the same as for
Router Mode.
•See Chapter 11 on page 82 for information on the configuring your wireless network.
•See Chapter 15 on page 136 for information on configuring your Maintenance settings.
7.4 AP Mode Status Screen
Click Expert > Status to open the Status screen.
Figure 30 Expert Mode: Status > System Status: Access Point Mode