User's Manual

Chapter 9 Status
ARMOR Z1 User’s Guide
64
The following table describes the labels in this screen.
9.6 WLAN 2.4G/5G Clients Screen
Use this screen to view the wireless stations (clients) that are currently associated to the ARMOR
Z1’s 2.4GHz or 5GHz wireless network.
Click Expert > Status > WLAN 2.4G Clients or WLAN 5G Clients to open the WLAN 2.4G/5G
Clients screen.
Figure 41 Expert > Status > WLAN 2.4G/5G Clients
The following table describes the labels in this screen.
Table 19 Expert > Status > DHCP Table
LABEL DESCRIPTION
# This is the index number of the host computer.
Status This field displays whether the connection to the host computer is up (a yellow bulb) or
down (a gray bulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click Apply to save your changes back to the ARMOR Z1.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 20 Expert > Status > WLAN 2.4G/5G Clients
LABEL DESCRIPTION
# This is the index number of an associated wireless client.
MAC Address This field displays the MAC address of an associated wireless client.
Association
Time
This field displays the time a wireless client first associated with the ARMOR Z1’s WLAN.