User's Manual

Chapter 10 WAN
ARMOR Z1 User’s Guide
68
Auto-IP-Change only works under the following conditions:
• The ARMOR Z1 must be in Router Mode (see Section 15.12 on page 147 for more information)
for Auto-IP-Change to become active.
• The ARMOR Z1 is set to receive a dynamic WAN IP address.
10.4 Internet Connection Screen
Use this screen to change your ARMOR Z1’s Internet access settings. Click Expert > WAN >
Internet Connection.
10.4.1 IPoE Encapsulation
This screen displays when you select IPoE encapsulation.