User's Manual

Chapter 11 Wireless LAN

ARMOR Z1 User’s Guide

11.3.3 WPA/WPA2

Select WPA or WPA2 from the Security Mode list.

Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2

in the Expert > Wireless > Wireless screen.

Figure 56 Expert > Wireless > Security Mode: WPA/WPA2

Group Key Update

Timer

The Group Key Update Timer is the rate at which the AP sends a new group key out to

all clients.

The default is 3600 seconds (60 minutes).

Apply Click Apply to save your changes back to the ARMOR Z1.

Cancel Click Cancel to reload the previous configuration for this screen.

Table 29 Expert > Wireless > Security Mode: WPA-PSK/WPA2-PSK (continued)

LABEL DESCRIPTION