User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 10 Wireless LAN
NBG6818 User’s Guide
107
Figure 58 Settings > WiFi > Main WiFi (Bridge Mode)
The following table describes the labels in this screen.
Table 32 Settings > WiFi > Main WiFi
LABEL DESCRIPTION
Main WiFi
Enable Main WiFi Select Enable to activate the 2.4GHz and/or 5GHz wireless LAN. Select Disable to turn it off.
2.4G/5G Name
(SSID)
The Service Set Identity (SSID) identifies the wireless LAN with which a wireless client is
associated. Enter a name (up to 32 printable characters found on a typical English language
keyboard) for the wireless LAN.
Click the Keep 2.4G & 5G name the same check box to use the same SSID for 2.4G and 5G
wireless network.
Security Mode Select the security mode you want to apply to the NBG6818.
Password The password has two uses:
• Manual: Manually enter the same password on the Zyxel Device and the client. Enter 8-63
ASCII characters or exactly 64 hexadecimal (‘0-9’, ‘a-f’) characters.
• WPS: When using WPS, the Zyxel Device sends this password to the client.
Click the eye icon to show or hide the password of your wireless network. When the eye
icon is slashed , you’ll see the password in plain text. Otherwise, it is hidden.
Region The country is set to US by default.
2.4G/5G
Bandwidth
Select a bandwidth from the drop-down list box. The options vary depending on the
frequency band you want to apply to the NBG6818.
2.4G/5G Channel Select a channel from the drop-down list box. The options vary depending on the frequency
band you want to apply to the NBG6818.
Apply Click Apply to save your changes back to the NBG6818.
Cancel Click Cancel to reload the previous configuration for this screen.