User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 1 Introduction
NBG6818 User’s Guide
14
1.7 LEDs
Figure 4 Front Panel
The following table describes the front panel LED.
Table 1 Front Panel LED
COLOR STATUS DESCRIPTION
White On The NBG6818 is receiving power.
Blinking The NBG6818 is booting.
Dark Blue On Blue tooth is ready.
Blinking Blue tooth configuration is in process.
Amber Blinking (Slow) The NBG6818 is upgrading firmware.
Blinking (Fast) The NBG6818 is resetting.
Purple Blinking WPS configuration is in process.
Purple
and Dark
Blue
Blinking The NBG6818 is receiving power and ready for use.
Red On The NBG6818 detects and error while self-testing, or there is a
device malfunction.