User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 3 The Web Configurator
NBG6818 User’s Guide
30
3.3.1 Standard Mode Navigation Panel
Figure 10 Navigation Panel (Standard Mode)
The following table describes the submenus.
Table 3 Settings > System > Status (Standard Mode)
LINK TAB FUNCTION
Overview Use this screen to:
• View read-only information about your NBG6818
• Configure WiFi settings
• Change the brightness of your device’s LED
Diagnose Advanced
Speed Test
Use this screen to check the speed of the connection between your NBG6818
and the broadband modem/router.
Speed Test
History
Use this screen to view a summary of previously run speed tests.
Parental Control Device Use this screen to:
• View devices information
• Add and configure parental control rules or schedules
Profile Use this screen to enable or configure existing parental control rules.
OpenVPN Server OpenVPN
Server
Use this screen to create and configure an OpenVPN server account.
OpenVPN
Account
Use this screen to:
• View basic information about NBG6818 OpenVPN server
• View basic information about clients that are connected to the NBG6818
OpenVPN server