User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 3 The Web Configurator
NBG6818 User’s Guide
31
OpenVPN Client Use this screen to:
• View basic information about OpenVPN Server accounts that you are
connected to
• Add an OpenVPN Server Account you want your NBG6818 to connect to
when the NBG6818 functions as an OpenVPN client.
USB Application SAMBA Use this screen to:
• Set up file-sharing via the NBG6818 using Windows Explorer or the
workgroup name
• Configure the workgroup name and create file-sharing user accounts
FTP Use this screen to set up file sharing via the NBG6818 using FTP and create user
accounts.
USB Media
Sharing
Use this screen to configure settings for media sharing.
Internet Internet
Connection
This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
NAT & Port
Forwarding
Use this screen to enable NAT.
Use this screen to configure servers behind the NBG6818 and forward incoming
service requests to the servers on your local network.
Passthrough Use this screen to change your NBG6818’s port triggering settings.
Port Trigger Use this screen to configure ALGs (Application Layer Gateway) and VPN pass-
through settings.
Dynamic DNS Use this screen to configure dynamic DNS.
UPnP Use this screen to enable UPnP on the NBG6818.
WiFi Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
Guest WiFi Use this screen to configure multiple BSSs on the NBG6818.
MAC Filter Use the MAC filter screen to configure the NBG6818 to block access to devices
or block the devices from accessing the NBG6818.
WPS Use this screen to configure WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN LAN IP Use this screen to configure the NBG6818’s LAN IP address and subnet mask.
Use this screen to configure the IPv6 address for the NBG6818 on the LAN.
Use this screen to enable the NBG6818’s DHCP server.
IPv6 LAN Use this screen to configure the IPv6 address for your NBG6818 on the LAN.
Firewall IPv4 Firewall Use this screen to configure IPv4 firewall rules.
IPv6 Firewall Use this screen to configure IPv6 firewall rules.
Table 3 Settings > System > Status (Standard Mode) (continued)
LINK TAB FUNCTION