User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 3 The Web Configurator
NBG6818 User’s Guide
32
3.3.2 Bridge Mode Navigation Panel
Figure 11 Navigation Panel (Bridge Mode)
The following table describes the submenus.
System Status Use this screen to view the basic information of the NBG6818
General
Setting
Use this screen to change password or to set the timeout period of the
management session.
Remote
Access
Use this screen to configure the interface/s from which the NBG6818 can be
managed remotely and specify a secure client that can manage the
NBG6818.
Maintenance Use this screen to upload firmware, reboot the NBG6818 without turning the
power off or reset the NBG6818 to factory default.
Operating
Mode
Use this screen to select whether your device acts as a router, or a bridge.
Logs Use this screen to view the list of activities recorded by your NBG6818.
Table 3 Settings > System > Status (Standard Mode) (continued)
LINK TAB FUNCTION
Table 4 Settings > System > Status (Bridge Mode)
LINK TAB FUNCTION
Overview Use this screen to:
• View read-only information about your NBG6818
• Configure WiFi settings
• Change the brightness of your device’s LED
Diagnose Advanced
Speed Test
Use this screen to check the speed of the connection between your NBG6818
and the broadband modem/router.
Speed Test
History
Use this screen to view a summary of previously run speed tests.