User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 7 Tutorials
NBG6818 User’s Guide
43
3 Click the Speed Test History tab to view a summary of the tests made. Click Clear to delete all records.
7.3 Configure the NBG6818’s WiFi Networks
In the NBG6818 you can configure independent wireless networks with different privileges. Clients can
associate only with the network for which they have security settings (SSID and password). The following
table describes the different NBG6818’s profile networks and their privileges.
Note: A user can only configure the WiFi networks’ security settings if they are connected to
the Main WiFi network.
1 Click the Navigation Panel icon on the top-left corner ( ), and click Settings to open the WiFi screen.
Use each tab in the WiFi menu to configure each of the WiFi networks’ security settings.
Table 7 WiFi Network Privileges
WIFI NETWORK INTERNET ACCESS
2.4G / 5G WIFI
NETWORK
ACCESS TO WEB
CONFIGURATOR
ACCESS TO WIRED LAN
Main WiFi Yes 2.4G and 5G Yes Yes
Guest WiFi Yes 2.4G and 5G No No