User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 8 Applications
NBG6818 User’s Guide
60
Figure 22 Add New Profile
The following table describes the fields in this screen.
Table 10 Add New Profile
LABEL DESCRIPTION
Profile Name Enter a name for this rule.
Select All Click Select All then deselect the blocks you don’t want or click on blocks
separately to specify days and times to turn the Wireless LAN on or off.
Deselect All Click Deselect All to remove all the wireless LAN scheduling.
Apply Click Apply to save your changes back to the NBG6818.
Back Click Back to exist the screen without saving.