User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 8 Applications
NBG6818 User’s Guide
65
8.3.3 OpenVPN Client Screen
Use the OpenVPN Server List in this screen to view the basic information of the OpenVPN Server
accounts that you are connected to when the NBG6818 functions as an OpenVPN client.
Figure 28 Example of NBG6818 Acting As VPN Client
Note: You can only connect to one server at a time.
Figure 29 OpenVPN Client
The following table describes the fields in this screen.
Apply Click Apply to save your changes back to the NBG6818.
Cancel Click Cancel to exist this screen without saving.
Table 14 OpenVPN Account List-Add Rule
LABEL DESCRIPTION
Table 15 OpenVPN Client
LABEL DESCRIPTION
No. This is the rule index number.
Description This field displays a name to identify this rule.
Enable VPN on This field displays the interface(s) through which your NBG6818 are allowed to
connect to an OpenVPN Server account.
Connected IP This field displays the IP address of the OpenVPN Server account your NBG6818 is
connected to.