User Manual
Table Of Contents
- ARMOR G1
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG6818 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG6818’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG6818’s LED (Light)
- 7.9 Change Your NBG6818 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 8 Applications
NBG6818 User’s Guide
67
8.4 USB Application
8.4.1 SAMBA Server Screen
Use this screen to set up file-sharing via the NBG6818 using Windows Explorer or the workgroup name.
You can also configure the workgroup name and create file-sharing user accounts.
Click USB Application > SAMBA to show the following screen.
Figure 31 USB Application > SAMBA
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the NBG6818.
Cancel Click Cancel to exist this screen without saving.
Table 16 OpenVPN Server List-Add Rule
LABEL DESCRIPTION
Table 17 USB Application > SAMBA
LABEL DESCRIPTION
SAMBA Setup
Enable SAMBA Select this to enable file sharing through the NBG6818 using Windows Explorer or by browsing
to your work group.
Name Specify the name to identify the NBG6818 in a work group.