User Manual

Chapter 8 Applications
NBG6818 User’s Guide
68
8.4.1.1 Add SAMBA Account Screen
Use this screen to configure settings for a SAMBA account.
Click USB Application > SAMBA > Add Rule to show the following screen.
Work Group You can add the NBG6818 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your NBG6818 automatically joins. You can set the NBG6818’s
workgroup name to be exactly the same as the workgroup name to which your computer
belongs to.
Note: The NBG6818 will not be able to join the workgroup if your local area
network has restrictions set up that do not allow devices to join a
workgroup. In this case, contact your network administrator.
Description Enter the description of the NBG6818 in a work group.
Require username
and password
Select Yes to need a user account for access to the connected USB stick from any
computer. Otherwise, select No.
User Accounts Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
No. This is the index number of the user account.
Status This field displays whether a user account is activated or not.
User Name This field displays the user name that will be allowed to access the shared files.
USB This field displays the user’s access rights to the USB storage device which is connected to
the NBG6818’s USB port.
Actions Click the icons under Actions to delete or edit a port forwarding rule.
Click to delete an existing trigger port settings.
Click to edit an existing trigger port settings.
Apply Click Apply to save your changes back to the NBG6818.
Cancel Click Cancel to begin configuring this screen afresh.
Table 17 USB Application > SAMBA (continued)
LABEL DESCRIPTION