Users Manual Part 1

Chapter 9 Wireless
NBG7510 User’s Guide
114
Figure 60 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
9.6 WMM
Use this screen to enable WiFi MultiMedia (WMM) and WMM Automatic Power Save (APSD) in wireless
networks for multimedia applications. WMM enhances data transmission quality, while APSD improves
Table 37 Network Setting > Wireless > WPS
LABEL DESCRIPTION
General
WPS Click to enable ( ) and have the Zyxel Device activate WPS. Otherwise, it is disabled.
Add a new device with WPS Method
Method 1 PBC Use this section to set up a WPS WiFi network using Push Button Configuration (PBC). Click this
switch to make it turn blue. Click Apply to activate WPS method 1 on the Zyxel Device.
WPS Click this button to add another WPS-enabled WiFi device (within WiFi range of the Zyxel
Device) to your WiFi network. This button may either be a physical button on the outside of a
device, or a menu button similar to the WPS button on this screen.
Note: You must press the other WiFi device’s WPS button within 2 minutes of pressing
this button.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.