Users Manual Part 1

Chapter 3 Web Configurator
NBG7510 User’s Guide
29
Figure 18 Navigation Panel
Table 6 Navigation Panel Summary
LINK TAB FUNCTION
Connection Status Use this screen to configure basic Internet access, wireless settings, and
parental control settings. This screen also shows the network status of the
Zyxel Device and computers/devices connected to it.
Network Setting
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new
WAN connections.
Wireless General Use this screen to configure the wireless LAN settings and WLAN
authentication or security settings.
Guest/More AP Use this screen to configure multiple BSSs on the Zyxel Device.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.
WPS Use this screen to configure and view your WPS (WiFi Protected Setup)
settings.
WMM Use this screen to enable or disable WiFi MultiMedia (WMM).
Others Use this screen to configure advanced wireless settings.
Channel Status Use this screen to scan wireless LAN channel noises and view the results.
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Subnet
Use this screen to configure IP alias and public static IP.
Wake on LAN Use this screen to remotely turn on a device on the local network.
TFTP Server Name Use DHCP option 66 to identify a TFTP server name.
Routing Static Route Use this screen to view and set up static routes on the Zyxel Device.
DNS Route Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS servers.