Users Manual Part 1

Chapter 5 Tutorials
NBG7510 User’s Guide
40
See the label on the Zyxel Device for the WiFi network settings and then connect manually to the Zyxel
Device. See Section 5.3.2 on page 41. Alternatively, you can set up a WiFi network using WPS.
5.3.1 Changing Security on a WiFi Network
This example changes the default security settings of a WiFi network to the following:
1 Go to the Network Setting > Wireless > General screen. Select More Secure as the security level and
WPA2-PSK as the security mode. Configure the screen using the provided parameters. Click Apply.
2 Go to the Wireless > Others screen. Set 802.11 Mode to 802.11b/g/n Mixed, and then click Apply.
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed