Users Manual Part 1

Chapter 6 Rover App Tutorials

NBG7510 User’s Guide

6.7.2 Setting Up Guest WiFi Settings

Follow the steps below to configure your guest WiFi settings. Use the parameters in the table below to

create a different set of WiFi name and password.

1 Tap on the Guest tab and then the WiFi > Guest screen appears. Click the switch to enable Guest WiFi.

When the switch goes to the right, Guest WiFi is enabled. Tap on the( ) icon to edit the guest WiFi

Name and WiFi Password. In this example, enter Guest as your guest WiFi Name and guest123 as your

guest WiFi Password. Click Save to save the changes.





2 You can use the app to create a QR code with your WiFi network name and password. Click Show WiFi

QR Code in the WiFi > Guest screen, the QR code will display as shown.

Use a smartphone to scan the QR code to join the guest WiFi network. By printing and placing the QR

code somewhere accessible, you can let your friends or guests scan the QR code and join the WiFi

network directly without revealing your actual WiFi password.

Table 15 The Guest WiFi Settings Parameters Example

GUEST WIFI

WiFi Name Guest

WiFi Password guest123