Users Manual Part 2

Chapter 28 Log Setting
NBG7510 User’s Guide
226
Figure 140 Maintenance > Log Setting
The following table describes the fields in this screen.
Table 99 Maintenance > Log Setting
LABEL DESCRIPTION
Syslog Settings
Syslog Logging Click the switch (it will turn blue) to enable syslog logging.
Mode Select Remote to have the Zyxel Device send it to an external syslog server.
Select Local File to have the Zyxel Device save the log file on the Zyxel Device itself.
Select Local File and Remote to have the Zyxel Device save the log file on the Zyxel Device itself
and send it to an external syslog server.
Note: A warning appears upon selecting Remote or Local File and Remote.
Just click OK to continue.
Syslog Server Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
UDP Port Enter the port number used by the syslog server.
E-mail Log Settings