User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 1 Introduction
NBG7815 User’s Guide
12
Figure 1 Internet Access Application: Wired Connection
• Wireless. Wireless clients can connect to the NBG7815 to access network resources. You can use WPS
(Wi-Fi Protected Setup) to create an instant network connection with another WPS-compatible
device.
Figure 2 Internet Access Application: Wireless Connection
• WAN. Connect to a broadband modem/router for Internet access.
Figure 3 Internet Access Application: Ethernet WAN
1.3 Ways to Manage the NBG7815
Use the following method to manage the NBG7815.
• Web Configurator. This is recommended for everyday management of the NBG7815 using a
(supported) web browser.
• Zyxel ARMOR. This is the app you can use to manage the NBG7815 on your cellphone. To install the
app, scan the QR code on the QSG.