User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 13 System
NBG7815 User’s Guide
141
Standard (Router)
A router connects your local network with another network, such as the Internet. The router has two IP
addresses, the LAN IP address and the WAN IP address.
Figure 83 LAN and WAN IP Addresses in Standard Mode
Bridge
A bridge enabled all Ethernet ports to be bridged together and be in the same subnet. To connect to
the Internet, another device, such as a router, is required.
Figure 84 Bridge Mode
Click Settings > System > Operating Mode to show the following screen.