User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 1 Introduction
NBG7815 User’s Guide
15
Figure 5 Rear Panel
1.8 Desk Mounting
Place the side of the NBG7815 with rubber feet carefully on the desk.
1.9 Wall Mounting
You may need screw anchors if mounting on a concrete or brick wall.
Figure 6 Screw Specifications
Amber Blinking (Slow) The NBG7815 is upgrading firmware.
Blinking (Fast) The NBG7815 is resetting.
Purple Blinking WPS configuration is in process.
Purple
and Dark
Blue
Blinking The NBG7815 is receiving power and ready for use.
Red On The NBG7815 detects Internet connection problems.
Table 1 Front Panel LED (continued)
COLOR STATUS DESCRIPTION
Table 2 Wall Mounting Information
Distance between holes 10.50 cm
M4 Screws Two
Screw anchors (optional) Two