User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 3 The Web Configurator
NBG7815 User’s Guide
34
USB Application SAMBA Use this screen
• Set up file-sharing via the NBG7815 using Windows Explorer or the
workgroup name
• Configure the workgroup name and create file-sharing user accounts
FTP Use this screen to set up file sharing via the NBG7815 using FTP and create user
accounts.
USB Media
Sharing
Use this screen to configure settings for media sharing.
WiFi Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
MAC Filter Use the MAC filter screen to configure the NBG7815 to block access to devices
or block the devices from accessing the NBG7815.
WPS Use this screen to configure WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN LAN IP Use this screen to configure the NBG7815’s LAN IP address and subnet mask.
Use this screen to configure the IPv6 address for the NBG7815 on the LAN.
Use this screen to enable the NBG7815’s DHCP server.
System Status Use this screen to view the basic information of the NBG7815
General
Setting
Use this screen to change password or to set the timeout period of the
management session.
Remote
Access
Use this screen to enable remote assistant.
Maintenance Use this screen to upload firmware, reboot the NBG7815 without turning the
power off or reset the NBG7815 to factory default.
Operating
Mode
Use this screen to select whether your device acts as a router, or a bridge.
Logs Use this screen to view the list of activities recorded by your NBG7815.
Table 4 Settings > System > Status (Bridge Mode) (continued)
LINK TAB FUNCTION