User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 4 NBG7815 Modes
NBG7815 User’s Guide
35
CHAPTER 4
NBG7815 Modes
4.1 Overview
This chapter introduces the different operating modes available on your NBG7815. Or simply how the
NBG7815 is being used in the network.
4.2 Modes
This refers to the operating mode of the NBG7815, which can act in:
• Standard Mode: This is the default device mode of the NBG7815. Use this mode to connect the local
network to another network, like the Internet. Go to Section 5.3 on page 37 to view the Status screen
in this mode.
Figure 12 Standard Mode Example
• Bridge Mode: Use this mode if you want to extend your network by allowing network devices to
connect to the NBG7815 wirelessly. Go to Section 6.4 on page 42 to view the Status screen in this
mode.