User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 8 Applications
NBG7815 User’s Guide
66
8.3.3 OpenVPN Client Screen
Use the OpenVPN Server List in this screen to view the basic information of the OpenVPN Server
accounts that you are connected to when the NBG7815 functions as an OpenVPN client.
Figure 28 Example of NBG7815 Acting As VPN Client
Note: You can only connect to one server at a time.
Figure 29 OpenVPN Client
The following table describes the fields in this screen.
Apply Click Apply to save your changes back to the NBG7815.
Cancel Click Cancel to exist this screen without saving.
Table 14 OpenVPN Account List-Add Rule
LABEL DESCRIPTION
Table 15 OpenVPN Client
LABEL DESCRIPTION
No. This is the rule index number.
Description This field displays a name to identify this rule.
Enable VPN on This field displays the interface(s) through which your NBG7815 are allowed to
connect to an OpenVPN Server account.
Connected IP This field displays the IP address of the OpenVPN Server account your NBG7815 is
connected to.