User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 8 Applications
NBG7815 User’s Guide
74
The following table describes the labels in this screen.
8.5 Access Your Shared Files From a Computer
8.5.1 Using Windows Explorer
You can use Windows Explorer to access the file storage devices connected to the NBG7815.
Note: The examples in this User’s Guide show you how to use Microsoft’s Windows 7 to browse
your shared files. Refer to your operating system’s documentation for how to browse
your file structure.
Open Windows Explorer to access usb1 using the Windows Explorer browser.
In the Windows Explorer’s address bar type a double backslash “\\” followed by the IP address of the
NBG7815 (the default IP address of the NBG7815 is 192.168.123.1) and press [ENTER]. The share folder
usb1 is available.
Table 21 USB Application > USB Media Sharing
LABEL DESCRIPTION
USB Media Sharing
Media Server
(DLNA) Setup
Choose Enable to have the NBG7815 function as a DLNA-compliant media server.
Otherwise, choose Disable.
Share Media Type Permission
Photo/Music/Video Select the media type that you want to share on the USB device connected to the
NBG7815’s USB port.
Rescan Media Control
Rescan Click this button to have the NBG7815 scan the media files on the connected USB device
and do indexing of the file list again so that DLNA clients can find the new files if any.
Apply Click Apply to save your changes back to the NBG7815.
Cancel Click Cancel to begin configuring this screen afresh.