User Manual

Table Of Contents
Chapter 9 WAN
NBG7815 User’s Guide
91
9.5.1 Add Port Forwarding Rule Screen
Use this screen to configure your NBG7815’s port forwarding settings to forward incoming service
requests to the servers on your local network. Click Settings > Internet > NAT & Port Forwarding> Add Rule
to show the following screen.
Figure 47 Add Port Forwarding Rule
Server IP Address This field displays the internal IP address of the server.
Internal Port This is the port number used to connect to this service using the server's internal IP address on
the LAN.
Actions Click the icons under Actions to delete or edit a port forwarding rule.
Click to delete the rule.
Click to edit the rule.
Apply Click Apply to save your changes back to the NBG7815.
Cancel Click Cancel to begin configuring this screen afresh.
Table 25 Expert Mode > WAN > NAT > General (continued)
LABEL DESCRIPTION