P-202H Plus v2 ISDN Internet Access Router Quick Start Guide Version 3.
P-202H Plus v2 Quick Start Guide Overview The P-202H Plus v2 is an ISDN router with a four-port built-in switch. It is equipped with two integrated phone ports for connecting analog phones and/or fax devices. It also provides advanced calling features, such as call waiting, three-way calling, call transferring and forwarding. See your User’s Guide for background information on all features. 1 Requirements Make sure you have the following things before you set up your P-202H Plus v2.
P-202H Plus v2 Quick Start Guide 4 POWER: Use the power adaptor provided with your P-202H Plus v2 to connect an appropriate power source to this port. Make sure the power source is on. 5 Push in the POWER button. Look at the LEDs on the front panel. • The POWER LED blinks while your P-202H Plus v2 starts up and stays on once the system is ready. • The ISDN and ETHERNET LEDs stay on if the corresponding port is properly connected and blinks when there is traffic.
P-202H Plus v2 Quick Start Guide 5 Click Wizard Setup in the main menu to display the first wizard screen. 6 Use this screen to configure your ISDN line and how the P-202H Plus v2 handles incoming calls. Select from the B Channel Usage dropdown box. If you are using both B channes, select Switch/Switch (default). If you are only using one B channel (for example, your router is sharing the ISDN line with another device), then select Switch/Unused.
P-202H Plus v2 Quick Start Guide If you select Don't Care, then all data calls are routed to the P-202H Plus v2 itself. Analog calls, however, are routed to either A/B adapter 1 or 2, or simply ignored, depending on the Analog Call Routing field. If Incoming Phone Number Matching is Don't Care and Analog Call Routing is either A/B Adapter 1, A/B Adapter 2 or Both, then the P-202H Plus v2 uses Global Analog Call to decide how to handle global calls.
P-202H Plus v2 Quick Start Guide 8 Verify the settings in the screen. To change the LAN information on the P202H Plus v2, click Change LAN Configuration. Otherwise click Save Settings to save the configuration and skip to step 10. 9 Enter the LAN IP address of your P-202H Plus v2 in dotted decimal notation in the LAN IP Address field. For example, 192.168.1.1 (factory default). Enter a subnet mask in dotted decimal notation in the LAN Subnet Mask field.
P-202H Plus v2 Quick Start Guide Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool Starting Address field. Specify the size or count of the IP address pool in the Size of Client IP Pool field. Enter the IP address(es) of the DNS server(s) in the Primary DNS Server and/or Secondary DNS Server fields. Click Finish. 10 The P-202H Plus v2 automatically tests the connection to the computer(s) connected to the LAN ports.
P-202H Plus v2 Quick Start Guide 3 Right-click Local Area Connection and then click Properties. 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options. 7 Click OK to close the Internet Protocol (TCP/IP) Properties window.
