User's Manual

Chapter 8 Wireless LAN

P-2612HW Series User’s Guide

151

8.4 MAC Filter

Use this screen to change your ZyXEL Device’s MAC filter settings. Click Network

> Wireless LAN > MAC Filter. The screen appears as shown.

Figure 99 Network > Wireless LAN > MAC Filter

The following table describes the labels in this screen.

Table 37 Network > Wireless LAN > MAC Filter

LABEL DESCRIPTION

Active MAC

Filter

Select the check box to enable MAC address filtering.

Filter Action

Define the filter action for the list of MAC addresses in the MAC Address

table.

Select Deny to block access to the ZyXEL Device, MAC addresses not listed

will be allowed to access the ZyXEL Device

Select Allow to permit access to the ZyXEL Device, MAC addresses not

listed will be denied access to the ZyXEL Device.

Set

This is the index number of the MAC address.