User's Manual

Chapter 8 Wireless LAN
P-2612HW Series User’s Guide
155
Click Network > Wireless LAN > WDS. The following screen displays.
Figure 102 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 40 Network > Wireless LAN > WDS
LABEL DESCRIPTION
Enable WDS
Security
Select this option and the type of the key used to encrypt data between
APs. All the wireless APs (including the ZyXEL Device) must use the
same pre-shared key for data transmission.
If you de-select this option, the data sent between APs is not encrypted.
Anyone can read it.
TKIP Select this to use TKIP (Temporal Key Integrity Protocol) encryption.
AES Select this to use AES (Advanced Encryption Standard) encryption.
# This is the index number of the individual WDS link.
Active Select this to activate the link between the ZyXEL Device and the peer
device to which this entry refers. When you do not select the check box
this link is down.
Remote Bridge
MAC Address
Type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
PSK Enter a Pre-Shared Key (PSK) from 8 to 63 case-sensitive ASCII
characters (including spaces and symbols).
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.