User's Manual

P-2612HW Series User’s Guide
185
CHAPTER 10
Voice
10.1 Overview
Use this chapter to:
• Connect an analog phone to the ZyXEL Device.
• Make phone calls over the Internet, as well as the regular phone network.
• Configure settings such as speed dial and distinctive ringing.
• Configure network settings to optimize the voice quality of your phone calls.
10.1.1 What You Can Do in the VoIP Screens
These screens allow you to configure your ZyXEL Device to make phone calls over
the Internet and your regular phone line, and to set up the phones you connect to
the ZyXEL Device.
•Use the SIP Settings screen (Section 10.2 on page 187) to set up information
about your SIP account.
•Use the SIP QoS screen (Section 10.4 on page 193) to configure Quality of
Service for VoIP calls. QoS can give VoIP traffic higher priority on the network so
it gets dealt with more quickly.
•Use the Analog Phone screen (Section 10.5 on page 194) to control which SIP
accounts the phones connected to the ZyXEL Device use.
•Use the Advanced Analog Phone Setup screen (Section 10.6 on page 194) to
configure audio settings such as volume levels for the phones connected to the
ZyXEL Device.
•Use the EXT. Table screen (Section 10.7 on page 197) to configure extension
numbers for the phones connected to the ZyXEL Device so they can be
separately identified for intercom use.
•Use the Common Phone Settings screen (Section 10.8 on page 198) to turn
immediate dialing on or off.
•Use the Region screen (Section 10.9 on page 199) to change settings that
depend on the country you are in.
•Use the Speed Dial screen (Section 10.10 on page 200) to set up shortcuts for
dialing frequently-used (VoIP) phone numbers.