User's Manual

Chapter 10 Voice
P-2612HW Series User’s Guide
194
10.5 The Analog Phone Screen
Use this screen to control which SIP accounts and PSTN line each phone uses. To
access this screen, click VoIP > Phone > Analog Phone.
Figure 122 VoIP > Phone > Analog Phone
Each field is described in the following table.
10.6 The Advanced Analog Phone Setup Screen
Use this screen to configure the volume, echo cancellation and VAD (Voice Activity
Detection) settings for each individual phone port on the ZyXEL Device. You can
also select which SIP account to use for making outgoing calls.
Table 55 VoIP > Phone > Analog Phone
LABEL DESCRIPTION
Phone Port
Settings
This is the phone port in the ZyXEL Device.
SIP Account Select the SIP account you want to use when making outgoing calls
with the analog phone connected to this phone port.
Incoming Call
apply to
Select a SIP account if you want to receive phone calls for the selected
SIP account on this phone port.
If you select more than one SIP account for incoming calls, there is no
way to distinguish between them when you receive phone calls. If you
do not select a source for incoming calls, you cannot receive any calls
on this phone port.
Apply
Click this to save your changes and to apply them to the ZyXEL Device.
Cancel
Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The
Advanced Analog Phone Setup screen appears.