User's Manual

Chapter 12 Firewall
P-2612HW Series User’s Guide
231
1 Click Security > Firewall > Rules.
2 Select WAN to LAN in the Packet Direction field.
Figure 136 Firewall Example: Rules
3 In the Rules screen, select the index number after that you want to add the rule.
For example, if you select “6”, your new rule becomes number 7 and the previous
rule 7 (if there is one) becomes rule 8.
4 Click Add to display the firewall rule configuration screen.
5 In the Edit Rule screen, click the Edit Customized Services link to open the
Customized Service screen.
6 Click an index number to display the Customized Services Config screen and
configure the screen as follows and click Apply.
Figure 137 Edit Custom Port Example
7 Select Any in the Destination Address List box and then click Delete.