User's Manual

Chapter 15 Certificates
P-2612HW Series User’s Guide
318
15.12 Directory Server Add and Edit
Click Security > Certificates > Directory Servers to open the Directory
Servers screen. Click Add (or the details icon) to open the Directory Server
Add screen. Use this screen to configure information about a directory server that
the ZyXEL Device can access.
Figure 186 Security > Certificates > Directory Server > Add
The following table describes the labels in this screen.
Table 106 Security > Certificates > Directory Server > Add
LABEL DESCRIPTION
Directory
Service Setting
Name Type up to 31 ASCII characters (spaces are not permitted) to identify
this directory server.
Access Protocol Use the drop-down list box to select the access protocol used by the
directory server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP
that specifies how clients access directories of certificates and lists of
revoked certificates.
A
Server Address Type the IP address (in dotted decimal notation) or the domain name of
the directory server.
Server Port This field displays the default server port number of the protocol that
you select in the Access Protocol field.
You may change the server port number if needed, however you must
use the same server port number that the directory server uses.
389 is the default server port number for LDAP.
Login Setting
Login The ZyXEL Device may need to authenticate itself in order to assess the
directory server. Type the login name (up to 31 ASCII characters) from
the entity maintaining the directory server (usually a certification
authority).