User's Manual

Chapter 17 802.1Q/1P
P-2612HW Series User’s Guide
335
17.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID and assign traffic priority for each port. Click
Advanced > 802.1Q/1P > Port Setting to display the following screen.
Figure 198 Advanced > 802.1Q/1P > Port Setting
Control Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN
group.
Tx Tag Select Tx Tagging if you want the port to tag all outgoing traffic
transmitted through this VLAN. You select this if you want to create
VLANs across different devices and not just the ZyXEL Device.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 110 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL DESCRIPTION