User's Manual

Chapter 2 Introducing the Web Configurator
P-2612HW Series User’s Guide
36
VPN Setup Use this screen to configure each VPN tunnel.
Monitor Use this screen to look at the current status of each
VPN tunnel.
VPN Global
Setting
Use this screen to allow NetBIOS traffic through VPN
tunnels.
Certificates My Certificates Use this screen to generate and export self-signed
certificates or certification requests and import the
ZyXEL Device’s CA-signed certificates.
Trusted CAs Use this screen to save CA certificates to the ZyXEL
Device.
Trusted
Remote Hosts
Use this screen to import self-signed certificates.
Directory
Servers
Use this screen to configure a list of addresses of
directory servers (that contain lists of valid and
revoked certificates).
Advanced
Static Route Static Route Use this screen to configure IP static routes to tell
your device about networks beyond the directly
connected remote nodes.
802.1Q/1P Group Setting Use this screen to activate 802.1Q/1P, specify the
management VLAN group, display the VLAN groups and
configure the settings for each VLAN group.
Port Setting Use this screen to configure the PVID and assign traffic
priority for each port.
QoS General Use this screen to enable QoS and traffic prioritizing,
and configure bandwidth management on the WAN.
Class Setup Use this screen to define a classifier.
Monitor Use this screen to view each queue’s statistics.
Dynamic DNS This screen allows you to use a static hostname alias
for a dynamic IP address.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION