User's Manual

Chapter 20 Remote Management Configuration
P-2612HW Series User’s Guide
361
20.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the ZyXEL
Device’s firmware and configuration files, please see the User’s Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
To change your ZyXEL Device’s FTP settings, click Advanced > Remote MGMT >
FTP. The screen appears as shown. Use this screen to specify which interfaces
allow FTP access and from which IP address the access can come.
Figure 212 Advanced > Remote Management > FTP
The following table describes the labels in this screen.
Secured Client
IP
A secured client is a “trusted” computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.
Table 120 Advanced > Remote Management > Telnet
LABEL DESCRIPTION
Table 121 Advanced > Remote Management > FTP
LABEL DESCRIPTION
Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Access Status Select the interface(s) through which a computer may access the ZyXEL
Device using this service.